Bitumen 80/100

BITUMEN 80/100

Bitumen 80/100 for Road Construction & Paving

Altum Commodities supplies Bitumen 80/100 for road construction, asphalt production and infrastructure projects, connecting dependable sourcing with the commercial and technical requirements of international buyers.

Bitumen 80/100 is a penetration-grade paving bitumen with a softer consistency than harder penetration grades such as 40/50 and 60/70. It is used as a binder in asphalt mixtures for road paving and related infrastructure works. Its suitability for a particular project depends on the applicable construction standard, climate conditions, traffic loading, pavement design and the specifications agreed for each cargo.

Get a Quote

Bitumen 80/100 is a penetration-grade paving bitumen used as a binder in asphalt mixtures. Its penetration range indicates a softer consistency than harder grades such as 40/50 and 60/70. Its suitability for a particular project depends on the applicable construction standard, climate conditions, traffic loading, pavement design and the specifications agreed for each cargo.

Our approach focuses on agreed product specifications, reliable supply channels and coordinated execution from origin through to destination. Product specifications and acceptance limits are confirmed for each available cargo and can be provided during the quotation process.

Applications

Bitumen 80/100 is used in road paving, hot-mix asphalt production and related bituminous pavement works where this penetration grade meets the project's technical requirements. Its selection depends on the asphalt mix design, expected traffic and climate conditions, applicable engineering standards and project specifications.

Bitumen 80/100

Penetration at 25°C

0.1 mm

80–100*

ASTM D5/D5M / Supplier COA

Softening Point (Ring-and-Ball)

°C

As agreed

ASTM D36/D36M / Supplier COA

Ductility at 25°C

As agreed

ASTM D113 / Supplier COA

Flash Point (Cleveland Open Cup)

°C

As agreed

ASTM D92 / Supplier COA

Solubility

% by mass

As agreed

ASTM D2042 / Supplier COA

Relative Density (Specific Gravity)

—

As agreed

ASTM D70 / Supplier COA

* The 80/100 designation indicates the nominal penetration-grade classification. The applicable standard, reported penetration result and all acceptance limits must be confirmed against the agreed product specification and the supplier's Certificate of Analysis (COA) for the relevant cargo.